|
Back
Here is an 8' deluxe model.
2x6's all get screwed to center ring.
Block to level at this point.

4x4's flush with both ends of 2x6's and bottom.
First lay floor sections in place, next attach lower rails, then upper rails.
Now lay 2x6's flat on top of upper rails. - This creates a sill for
rafters.

Attach 2x6 skirt board around perimeter of floor
Screw rafters to sillplate (flush on outside)
Screw rafters to chimney.
Screw roof panels to rafters at seems (caps will hides crews).
Attach fascia boards
Cap seams and attach Cupola.
This Gazebo be it an 8',10' or 12' can easily be accomplished in a day.
Bigger units may take longer but its not very strenuous and its a lot of
fun ! |